SICK i10 Safety Switch, Power, Fibreglass Reinforced Thermoplastic

RS-stocknr.:: 285-1812
Fabrikantnummer:: i10-E0253 Lock
Fabrikant:: SICK

Subtotaal (1 eenheid)*

€ 229,27

(excl. BTW)

€ 277,42

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Voorradig bij de fabrikant

Klaar voor verzending vanaf 04 december 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 229,27

*prijsindicatie

RS-stocknr.:: 285-1812
Fabrikantnummer:: i10-E0253 Lock
Fabrikant:: SICK

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SICK
	Lock Style	Power
	Product Type	Safety Switch
	Actuator Included	No
	Safety Contacts	2 NC
	Housing Material	Fibreglass Reinforced Thermoplastic
	Series	i10
	Switch Contact Current	4A
	Contact DC Voltage	24V dc
	IP Rating	IP67
	Minimum Operating Temperature	-20°C
	Contact AC Voltage	230V ac
	Hazardous Area Certification	No
	Maximum Operating Temperature	55°C
	Width	42mm
	Standards/Approvals	CE
	Number of Head Directions	4
	Depth	30mm
	Length	192mm

	Alles selecteren
	Merk SICK
	Lock Style Power
	Product Type Safety Switch
	Actuator Included No
	Safety Contacts 2 NC
	Housing Material Fibreglass Reinforced Thermoplastic
	Series i10
	Switch Contact Current 4A
	Contact DC Voltage 24V dc
	IP Rating IP67
	Minimum Operating Temperature -20°C
	Contact AC Voltage 230V ac
	Hazardous Area Certification No
	Maximum Operating Temperature 55°C
	Width 42mm
	Standards/Approvals CE
	Number of Head Directions 4
	Depth 30mm
	Length 192mm

Datasheet - i10-E0253 Lock

Land van herkomst:: DE

SICK i10 Series Safety Switch, 300N Locking Force, IP67 - i10-E0253 Lock

This safety switch is a power-to-lock interlock designed for industrial guard monitoring and locking applications. It features electro-mechanical operation with diagnostic-capable wiring and is intended for environments where a sealed enclosure and moderate temperature range are required. The actuator is not supplied with delivery.

Features and Benefits:

• Power-to-lock operation provides controlled locking force
• 2NC safety contacts enable positive-action monitoring
• Rated for 4A current at AC and DC for direct control
• Encapsulated housing resists ingress to IP67 standard
• Operates between -20°C and +55°C for varied climates

Applications

• Suitable for machine-guard locking with safety logic units
• Used for access control where waterproof protection is required
• Ideal for systems requiring electro-mechanical contact outputs
• Can be used with diagnostic wiring for safety circuits
• Used in installations demanding positive-action contacts

What type of electrical outputs does it provide?

It provides electro-mechanical contacts with two positive-action N/C safety contacts and an additional N/O door-monitoring contact.

What supply voltage is required for the solenoid?

The solenoid requires a DC supply in the range 20.4V DC to 26.4V DC.

How should fault detection be handled?

The device lacks internal fault detection so the connected safety-related logic unit must perform fault monitoring.

What wiring and connection provisions are available?

Cable entries accept three M20 glands and conductors from 0.34mm² to 1.5mm² can be used.