SICK i10 Safety Interlock Switch, Power, Fibreglass Reinforced Thermoplastic, Electromagnetic

RS-stocknr.:: 285-9562
Fabrikantnummer:: i10-E0454 Lock
Fabrikant:: SICK

Subtotaal (1 eenheid)*

€ 310,07

(excl. BTW)

€ 375,18

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

6 stuk(s) klaar voor verzending

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 310,07

*prijsindicatie

RS-stocknr.:: 285-9562
Fabrikantnummer:: i10-E0454 Lock
Fabrikant:: SICK

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SICK
	Product Type	Safety Interlock Switch
	Lock Style	Power
	Lock Type	Electromagnetic
	Actuator Included	No
	Safety Contacts	1 NC, 2
	Housing Material	Fibreglass Reinforced Thermoplastic
	Series	i10
	Contact AC Voltage	24V ac
	Switch Contact Current	1A
	Minimum Operating Temperature	-20°C
	IP Rating	IP67
	Contact DC Voltage	24V dc
	Hazardous Area Certification	No
	Maximum Operating Temperature	55°C
	Length	192mm
	Standards/Approvals	IEC 60529
	Width	42mm
	Number of Head Directions	4
	Depth	40mm

	Alles selecteren
	Merk SICK
	Product Type Safety Interlock Switch
	Lock Style Power
	Lock Type Electromagnetic
	Actuator Included No
	Safety Contacts 1 NC, 2
	Housing Material Fibreglass Reinforced Thermoplastic
	Series i10
	Contact AC Voltage 24V ac
	Switch Contact Current 1A
	Minimum Operating Temperature -20°C
	IP Rating IP67
	Contact DC Voltage 24V dc
	Hazardous Area Certification No
	Maximum Operating Temperature 55°C
	Length 192mm
	Standards/Approvals IEC 60529
	Width 42mm
	Number of Head Directions 4
	Depth 40mm

Land van herkomst:: DE

SICK i10 Series Safety Interlock Switch, 300N Locking Force, Glass-fibre Reinforced Thermoplastic Housing - i10-E0454 Lock

This safety interlock switch is a power-to-lock electro-mechanical device designed to secure access points in industrial settings. It provides monitored door and solenoid contacts for safety functions and connects via an 8-pin M12 plug. The unit is rated for use across a broad ambient range and offers diagnostic-capable series connection for safety logic integration.

Features and Benefits:

• Power-to-lock mechanism provides strong holding capability
• 1A rated contacts enable low-voltage control circuits
• IP67 enclosure permits use in wet or dusty environments
• Four-direction actuation supports varied mounting orientations
• Low coding level simplifies actuator matching for safety layouts

Applications

• Suitable for safeguarding machine access doors and guards
• Ideal for integration with safety control and Flexi Loop diagnostics
• Used with low-voltage AC/DC interlock control circuits
• Can be used where Compact locked access is required

What supply voltage is needed for the locking solenoid?

The solenoid requires 20.4V DC to 26.4V DC for operation.

Which contacts provide positive-action monitoring?

Two positive-action normally closed solenoid-monitoring contacts and one positive-action normally closed door-monitoring contact are provided.

How is fault detection handled if the switch fails?

The device lacks internal fault detection so the connected safety logic unit must perform fault monitoring.

What connector and pin arrangement does it use for wiring?

It uses an 8-pin M12 plug connector with a brass coupling nut for electrical connection.

What are the endurance and switching performance figures?

Mechanical life is 1 x 10^6 switching cycles with a B10d parameter of 3 x 10^6 switching cycles under small load.