SICK i10 Safety Switch, Fibreglass Polyester

RS-stocknr.:: 285-1814
Artikelnummer Distrelec:: 303-74-010
Fabrikantnummer:: i10-HB213
Fabrikant:: SICK

Subtotaal (1 eenheid)*

€ 55,55

(excl. BTW)

€ 67,22

(incl. BTW)

Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw

Aantal stuks	Per stuk
1 +	€ 55,55

*prijsindicatie

RS-stocknr.:: 285-1814
Artikelnummer Distrelec:: 303-74-010
Fabrikantnummer:: i10-HB213
Fabrikant:: SICK

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SICK
	Product Type	Safety Switch
	Actuator Included	No
	Safety Contacts	1 NO, 2 NC
	Housing Material	Fibreglass Polyester
	Series	i10
	IP Rating	IP67
	Switch Contact Current	3A
	Contact DC Voltage	24V dc
	Minimum Operating Temperature	-20°C
	Contact AC Voltage	240V ac
	Hazardous Area Certification	No
	Maximum Operating Temperature	80°C
	Width	30.4mm
	Standards/Approvals	IEC 60529
	Depth	31mm
	Length	90.5mm
	Number of Head Directions	2

	Alles selecteren
	Merk SICK
	Product Type Safety Switch
	Actuator Included No
	Safety Contacts 1 NO, 2 NC
	Housing Material Fibreglass Polyester
	Series i10
	IP Rating IP67
	Switch Contact Current 3A
	Contact DC Voltage 24V dc
	Minimum Operating Temperature -20°C
	Contact AC Voltage 240V ac
	Hazardous Area Certification No
	Maximum Operating Temperature 80°C
	Width 30.4mm
	Standards/Approvals IEC 60529
	Depth 31mm
	Length 90.5mm
	Number of Head Directions 2

Datasheet - i10-HB213

Land van herkomst:: DO

SICK i10 Series Safety Switch, IP67, Fibreglass Polyester Housing - i10-HB213

This safety switch is an electromechanical device designed to monitor guard positions in industrial settings. It provides clear switching behaviour using positive-action contacts and is intended for direct wiring into safety circuits where diagnostic logic is handled externally. The unit is built for use in harsh environments and rated for a wide ambient temperature range.

Features and Benefits:

• 3A contact current delivers compatible load switching capability
• 1NO 2NC contact arrangement enables Basic safety signalling
• IP67 enclosure rating permits washdown and dust‑tight installation
• Fibreglass polyester housing resists mechanical and chemical exposure
• -20 to 80°C operating range supports varied site temperatures

Applications

• Suitable for guarding doors on manufacturing machinery
• Ideal for conveyor access point monitoring
• Used with safety logic units for series safety circuits
• Can be used for equipment isolator interlocks
• Suitable for washdown environments in production areas

What type of contact switching principle does it use?

It uses a slow‑action switching element with positive‑action N/C and N/O contacts.

How should short‑circuit protection be implemented?

Short‑circuit protection is specified as 3A gG and should be applied in the supply circuit.

How is diagnostics and fault detection handled?

The switch has no internal fault detection so the connected safety‑related logic unit performs fault monitoring.

What electrical ratings apply for AC and DC operation?

Rated operating current is 3A at 240V AC and 2A at 24V DC.