SICK RE27 Safety Switch, Vistal, Magnet

RS-stocknr.:: 285-2283
Fabrikantnummer:: RE27-SB68LS04
Fabrikant:: SICK

Subtotaal (1 eenheid)*

€ 65,15

(excl. BTW)

€ 78,83

(incl. BTW)

Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw

Aantal stuks	Per stuk
1 +	€ 65,15

*prijsindicatie

RS-stocknr.:: 285-2283
Fabrikantnummer:: RE27-SB68LS04
Fabrikant:: SICK

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SICK
	Product Type	Safety Switch
	Lock Type	Magnet
	Actuator Included	No
	Housing Material	Vistal
	Series	RE27
	IP Rating	IP67
	Minimum Operating Temperature	-30°C
	Contact DC Voltage	24V dc
	Contact AC Voltage	230V ac
	Hazardous Area Certification	No
	Maximum Operating Temperature	60°C
	Standards/Approvals	IEC 60529
	Width	13mm
	Number of Head Directions	3
	Depth	25mm
	Length	88mm

	Alles selecteren
	Merk SICK
	Product Type Safety Switch
	Lock Type Magnet
	Actuator Included No
	Housing Material Vistal
	Series RE27
	IP Rating IP67
	Minimum Operating Temperature -30°C
	Contact DC Voltage 24V dc
	Contact AC Voltage 230V ac
	Hazardous Area Certification No
	Maximum Operating Temperature 60°C
	Standards/Approvals IEC 60529
	Width 13mm
	Number of Head Directions 3
	Depth 25mm
	Length 88mm

Land van herkomst:: MY

SICK RE27 Series Safety Switch, IP67, Magnet Lock Type - RE27-SB68LS04

This safety switch is a non-contact interlock designed for industrial machine guarding and perimeter protection. It operates magnetically without an actuator and is intended for use where a waterproof enclosure and Compact form factor are required. The device connects via an 8-pin M12 cable plug and provides reed contact outputs alongside LED status indication for straightforward integration into safety systems.

Features and Benefits:

• IP67 enclosure rating provides protection in wet environments
• Reed contact outputs allow low-voltage switching up to 30V DC
• Magnet lock type enables actuatorless magnetic actuation
• Flexi Loop support permits safe series connection with diagnostics
• Operating range from -30°C to 60°C suits varied conditions

Applications

• Suitable for safeguarding production machinery with waterproof requirements
• Used with conveyor guards where non-contact detection is needed
• Ideal for series wiring in safety circuits requiring diagnostics
• Can be used for perimeter doors in wet processing areas
• Used for integration into safety logic units in factories

What electrical voltages does it support?

It provides switching at up to 30V DC and contact ratings compatible with 230V AC for safety circuits.

How is the device connected to control systems?

A 0.2m cable with an M12 8-pin plug and copper conductors is supplied for connection.

What diagnostic or signalling features are available?

It includes one signalling contact and LEDs for status indication, with Flexi Loop enabling diagnostic communication.

How robust is the mechanical design against vibration and shock?

The housing endures vibration at 10Hz to 55Hz with 1mm amplitude and shock up to 30g for 11 ms.