SICK RE27 Safety Interlock Switch, Magnet, Vistal, Magnet

RS-stocknr.:: 285-8981
Artikelnummer Distrelec:: 301-25-394
Fabrikantnummer:: RE27-SA68L
Fabrikant:: SICK

Subtotaal (1 eenheid)*

€ 73,23

(excl. BTW)

€ 88,61

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending 5 stuk(s) vanaf 25 november 2026
Plus verzending 9 stuk(s) vanaf 16 december 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 73,23

*prijsindicatie

RS-stocknr.:: 285-8981
Artikelnummer Distrelec:: 301-25-394
Fabrikantnummer:: RE27-SA68L
Fabrikant:: SICK

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SICK
	Lock Style	Magnet
	Product Type	Safety Interlock Switch
	Lock Type	Magnet
	Actuator Included	No
	Safety Contacts	2 NO
	Housing Material	Vistal
	Series	RE27
	Switch Contact Current	100mA
	Contact DC Voltage	24V dc
	Contact AC Voltage	230V ac
	IP Rating	IP67
	Minimum Operating Temperature	-30°C
	Number of Auxiliary Contacts	1
	Maximum Operating Temperature	60°C
	Hazardous Area Certification	No
	Standards/Approvals	IEC 60529
	Width	25mm
	Length	88mm
	Number of Head Directions	3
	Depth	13mm

	Alles selecteren
	Merk SICK
	Lock Style Magnet
	Product Type Safety Interlock Switch
	Lock Type Magnet
	Actuator Included No
	Safety Contacts 2 NO
	Housing Material Vistal
	Series RE27
	Switch Contact Current 100mA
	Contact DC Voltage 24V dc
	Contact AC Voltage 230V ac
	IP Rating IP67
	Minimum Operating Temperature -30°C
	Number of Auxiliary Contacts 1
	Maximum Operating Temperature 60°C
	Hazardous Area Certification No
	Standards/Approvals IEC 60529
	Width 25mm
	Length 88mm
	Number of Head Directions 3
	Depth 13mm

Land van herkomst:: MY

SICK RE27 Series Safety Interlock Switch, IP67, 2 NO Safety Contacts - RE27-SA68L

This safety interlock switch is a non-contact magnetic sensor designed for position monitoring in industrial safety applications. It operates with reed-type outputs and provides status indication via LEDs while interfacing through an 8-pin M12 cable connection. The device is intended for use where environmental protection and Compact installation are required, and it is suitable for non-hazardous areas.

Features and Benefits:

• IP67 enclosure rating for protection in washdown environments
• 2NO safety contacts for straightforward safety circuit integration
• Switching current up to 100mA for low-voltage control loops
• Operating range maintained between -30°C and +60°C for varied climates
• Cable with M12 plug and 0.2m length simplifies wiring connections

Applications

• Suitable for safety gate monitoring on assembly lines
• Ideal for access control on packaging machinery
• Used with safety logic units for machine guard detection
• Can be used for interlocking on conveyor transfer points

What electrical voltages can be switched by the outputs?

The reed outputs switch up to 30V DC and support AC up to 230V where specified for compatible circuits.

How is fault management handled for safety functions?

The switch lacks internal fault detection so connected safety logic must perform fault monitoring.

What materials and indicators aid installation and alignment?

The housing is MADE of VISTAL and alignment is assisted by marked Active sensor surfaces Plus LEDs for status.

How is the unit connected electrically on site?

Connection is via an 8-pin M12 cable assembly with PVC cable and 0.25mm² conductors provided.

What mechanical resilience does the unit provide against vibration and shock?

It complies with vibration resistance 10Hz to 55Hz/1mm and shock resistance 30g/11 MS per applicable standards.