SICK i10 Safety Interlock Switch, Fibreglass Reinforced Thermoplastic

RS-stocknr.:: 285-9568
Fabrikantnummer:: i10-RA213
Fabrikant:: SICK

Subtotaal (1 eenheid)*

€ 38,58

(excl. BTW)

€ 46,68

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

18 stuk(s) klaar voor verzending
11 stuk(s) klaar voor verzending vanaf een andere locatie
Plus verzending 15 stuk(s) vanaf 04 november 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 38,58

*prijsindicatie

RS-stocknr.:: 285-9568
Fabrikantnummer:: i10-RA213
Fabrikant:: SICK

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SICK
	Product Type	Safety Interlock Switch
	Actuator Included	No
	Safety Contacts	1 NO, 2 NC
	Housing Material	Fibreglass Reinforced Thermoplastic
	Series	i10
	Switch Contact Current	3A
	IP Rating	IP66
	Contact AC Voltage	240V ac
	Minimum Operating Temperature	-25°C
	Contact DC Voltage	24V dc
	Maximum Operating Temperature	80°C
	Hazardous Area Certification	No
	Length	112mm
	Number of Head Directions	4
	Width	31mm
	Standards/Approvals	IEC 60529
	Depth	50mm

	Alles selecteren
	Merk SICK
	Product Type Safety Interlock Switch
	Actuator Included No
	Safety Contacts 1 NO, 2 NC
	Housing Material Fibreglass Reinforced Thermoplastic
	Series i10
	Switch Contact Current 3A
	IP Rating IP66
	Contact AC Voltage 240V ac
	Minimum Operating Temperature -25°C
	Contact DC Voltage 24V dc
	Maximum Operating Temperature 80°C
	Hazardous Area Certification No
	Length 112mm
	Number of Head Directions 4
	Width 31mm
	Standards/Approvals IEC 60529
	Depth 50mm

Datasheet - i10-RA213

Land van herkomst:: TW

SICK i10 Series Safety Interlock Switch, 3A Rated Current, IP66 - i10-RA213

This safety interlock switch is an electro-mechanical device designed to monitor and secure movable guards in industrial settings. It operates with a slow-action switching element and requires a separate safety logic unit for fault monitoring. The unit is intended for non-hazardous areas and offers a sealed enclosure suitable for environments exposed to dust and water.

Features and Benefits:

• 1NO 2NC safety contacts deliver clear state signalling
• 3A rated current enables 240V AC and 24V DC operation
• IP66 enclosure rating protects against dust and powerful water jets
• Fibreglass-reinforced thermoplastic housing resists mechanical wear
• Four-direction actuator head allows flexible approach angles

Applications

• Suitable for guarding machine access points in factories
• Ideal for integration with safety control units and relays
• Used with interlocked doors on conveyor and packaging lines
• Can be used for perimeter access monitoring in assembly cells

What electrical switching limits should installers observe?

The contacts are rated 3A for both 240V AC and 24V DC and require short-circuit protection F15.

How should fault detection be handled for safety functions?

The device lacks internal fault monitoring so a connected safety-related logic unit must perform all diagnostics.

What environmental temperatures can the unit tolerate?

It operates reliably between -25°C and +80°C and shares the same range for storage.

What mechanical durability can users expect from repeated operation?

The switch provides a mechanical life of 10 x 10^6 switching cycles and a B10d Value of 2 x 10^6 switching cycles under small loads.