SICK i110 Safety Interlock Switch, Die Cast Zinc

RS-stocknr.:: 285-9571
Fabrikantnummer:: i110-PA223
Fabrikant:: SICK

Subtotaal (1 eenheid)*

€ 58,58

(excl. BTW)

€ 70,88

(incl. BTW)

Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw

Aantal stuks	Per stuk
1 +	€ 58,58

*prijsindicatie

RS-stocknr.:: 285-9571
Fabrikantnummer:: i110-PA223
Fabrikant:: SICK

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SICK
	Product Type	Safety Interlock Switch
	Actuator Included	No
	Safety Contacts	2 NO, 2 NC
	Housing Material	Die Cast Zinc
	Series	i110
	Minimum Operating Temperature	-25°C
	IP Rating	IP66
	Switch Contact Current	3A
	Contact AC Voltage	240V ac
	Contact DC Voltage	24V dc
	Hazardous Area Certification	No
	Maximum Operating Temperature	80°C
	Width	43mm
	Depth	40mm
	Standards/Approvals	IEC 60529
	Length	118mm
	Number of Head Directions	4

	Alles selecteren
	Merk SICK
	Product Type Safety Interlock Switch
	Actuator Included No
	Safety Contacts 2 NO, 2 NC
	Housing Material Die Cast Zinc
	Series i110
	Minimum Operating Temperature -25°C
	IP Rating IP66
	Switch Contact Current 3A
	Contact AC Voltage 240V ac
	Contact DC Voltage 24V dc
	Hazardous Area Certification No
	Maximum Operating Temperature 80°C
	Width 43mm
	Depth 40mm
	Standards/Approvals IEC 60529
	Length 118mm
	Number of Head Directions 4

Datasheet - i110-PA223

Land van herkomst:: TW

SICK i110 Series Safety Interlock Switch, 3A Rated Operating Current, IP66 - i110-PA223

This safety interlock switch is an electromechanical device designed to monitor access to guarded machinery and to be integrated into machine safety circuits. It is supplied without an actuator and is intended for individual wiring to a safety-related logic unit. The die-cast zinc housing and varnished surface provide a compact, robust enclosure suitable for demanding industrial environments where a defined safe state must be enforced by external control.

Features and Benefits:

• 2NO 2NC safety contacts provide clear switching-state diagnostics
• 3A current rating supports AC-15 and DC-13 switching categories
• IP66 enclosure resists dust and powerful water jets
• Operating range from -25°C to +80°C enables high-temperature use
• 4-way actuator approach permits multi-directional actuation

Applications

• Suitable for safeguarding access doors on production lines
• Ideal for use with safety logic units for machine interlocks
• Used for monitoring guards in wet wash-down environments
• Can be used for conveyor guard and gate monitoring
• Suitable for low-voltage control circuits at 24V DC

How is fault detection handled in the device?

The switch has no internal fault detection

fault recognition must be performed by the connected safety-related logic unit.

What connection method does the device use for wiring?

It uses a single M20 cable gland and accepts conductors up to 2.5mm² cross-section.

What mechanical endurance can be expected from this switch?

The device is specified for 10x10^6 mechanical switching cycles and a B10d Value of 2x10^6 for small loads.

What electrical withstand ratings apply to the contacts?

The rated insulation voltage is Ui 250V and the impulse withstand voltage is Uimp 2,500V AC.

What mounting orientations and actuation speeds are supported?

The head allows four actuation directions and operation with approach speeds from 0.1m/min to 15m/min.