Moflash LEDA100 Series Amber Beacon-Buzzer Combination, IP65 17V Surface, Wall 80 dB @ 1m

RS-stocknr.:: 865-1625
Fabrikantnummer:: LEDA100-01-01
Fabrikant:: Moflash

Moflash LEDA100 Series Amber Beacon-Buzzer Combination, IP65 17V Surface, Wall 80 dB @ 1m

Subtotaal (1 eenheid)*

€ 66,92

(excl. BTW)

€ 80,97

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending vanaf 02 september 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 66,92

*prijsindicatie

RS-stocknr.:: 865-1625
Fabrikantnummer:: LEDA100-01-01
Fabrikant:: Moflash

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Moflash
	Product Type	Beacon-Buzzer Combination
	Minimum Sound Level	80dB
	Lens Colour	Amber
	Current Type	AC/DC
	Light Effect	Flashing
	Mount Type	Surface, Wall
	Sounder Type	Buzzer
	Current Consumption	430mA
	Series	LEDA100
	Terminal Type	Press Fit
	Bulb Type	LED
	Maximum Supply Voltage	17V
	Sound Level at 1m	80dB
	Housing Colour	Black
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	55°C
	Maximum Sound Level	80dB
	Hazardous Area Certification	No
	IP Rating	IP65
	Standards/Approvals	RoHS, CE
	Housing Material	Polycarbonate, ABS

	Alles selecteren
	Merk Moflash
	Product Type Beacon-Buzzer Combination
	Minimum Sound Level 80dB
	Lens Colour Amber
	Current Type AC/DC
	Light Effect Flashing
	Mount Type Surface, Wall
	Sounder Type Buzzer
	Current Consumption 430mA
	Series LEDA100
	Terminal Type Press Fit
	Bulb Type LED
	Maximum Supply Voltage 17V
	Sound Level at 1m 80dB
	Housing Colour Black
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature 55°C
	Maximum Sound Level 80dB
	Hazardous Area Certification No
	IP Rating IP65
	Standards/Approvals RoHS, CE
	Housing Material Polycarbonate, ABS

Land van herkomst:: GB

Moflash Amber Buzzer Beacon, Surface or Wall Mount, 80dB - LEDA100 Series - LEDA100-01-01

This buzzer beacon from Moflash provides visual and audible notification of situations that require immediate attention, such as fire or chemical contamination. You can mount it on a surface, conduit box or wall. Choose from two selectable visual alarm stages – flashing or continuous (static) mode. This beacon uses an LED (light-emitting diode) bulb as its visual signal. This makes it an energy-efficient and long-lasting option that calls for little maintenance. The unit's design lets you terminate the electrical connection inside the enclosure through the base.

Features and Benefits

• High sound level of 80dB at 1 metre so it can be heard above ambient noise

• IP65 (ingress protection) rating for protection against dust and water jets

• Operating temperature range of -25°C to +55°C makes it suitable for use in extreme conditions

• Supply voltage of 8 to 20V AC/DC, giving a wide range of supply options

Application Information

• Manufacturing

• Commercial electrical cable installations

• Warehouses

How loud is 80dB?

A sound level of 80dB is approximately equal to the noise that a petrol lawnmower would make, so it's clearly noticeable.

Moflash Industrial ECO LED Beacons with Piezo Buzzer - LEDA100 Series

The LEDA100 economy series incorporate a piezo buzzer, situated in the base of the unit, that is synchronised to the flash rate offering a combined audible & visual warning signal (Note: the buzzer cannot be controlled independently of the light).

These beacons have two selectable stages of alarm, flashing or continuous (static) mode, selectable by a jumper link on the PCB. The design also allows for a third wire connection giving flexibility to switch from a pre-set static mode to flashing.

The ECO LEDA beacons have been designed predominantly to offer a cost effective solution against more traditional incandescent types of lamps, whether through new plant and machinery installations or existing facility upgrades.

The design allows for termination inside the enclosure through the base.

Dual function, flashing or continuous (static) mode

80 dB piezo buzzer which only activates with the flashing mode

Continuously rated

LED long life

Low current consumption

Suitable for surface, conduit box or wall mounting

3 point fixing

360° light output around the vertical axis

Dustproof and weatherproof

UV stable polycarbonate lens

UV stable ABS plastic base

160 flashes per minute (FPM)

IP65 protection

RoHS compliant

CE Marked