FTDI Chip FT-MOD-4232HUB, USB Serial Hub Module, 1-Channel 480 Mbps, 5V, USB 2.0, 5 V, 36-Pin
- RS-stocknr.:
- 720-3736
- Fabrikantnummer:
- FT-MOD-4232HUB
- Fabrikant:
- FTDI Chip
Momenteel niet beschikbaar
Sorry, we weten niet wanneer dit weer voorradig zal zijn.
- RS-stocknr.:
- 720-3736
- Fabrikantnummer:
- FT-MOD-4232HUB
- Fabrikant:
- FTDI Chip
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | FTDI Chip | |
| Product Type | USB Serial Hub Module | |
| Number of Transceivers | 1 | |
| Maximum Data Rate | 480Mbps | |
| Sub Type | Transceiver | |
| USB Specification | USB 2.0 | |
| Power Supply Type | Single | |
| ESD Protection | No | |
| Minimum Supply Voltage | 5V | |
| Maximum Supply Voltage | 5V | |
| Mount Type | Through Hole | |
| Pin Count | 36 | |
| Supported Protocols | USB 2.0 | |
| Length | 75.04mm | |
| Standards/Approvals | No | |
| Height | 19.9mm | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk FTDI Chip | ||
Product Type USB Serial Hub Module | ||
Number of Transceivers 1 | ||
Maximum Data Rate 480Mbps | ||
Sub Type Transceiver | ||
USB Specification USB 2.0 | ||
Power Supply Type Single | ||
ESD Protection No | ||
Minimum Supply Voltage 5V | ||
Maximum Supply Voltage 5V | ||
Mount Type Through Hole | ||
Pin Count 36 | ||
Supported Protocols USB 2.0 | ||
Length 75.04mm | ||
Standards/Approvals No | ||
Height 19.9mm | ||
Automotive Standard No | ||
- Land van herkomst:
- CN
USB Hi-Speed Serial/Hub Module
Designed to connect to FTDI’s V2DIPx modules, as well as any USB Host interface (e.g. PC) to expand the number of interfaces that can be accessed downstream from a Host
USB 2.0 Hi-Speed compatible
One standard Type A USB header to connect to the Host
USB Hi-Speed FT4232H device for USB-Serial/Bitbang communications. Entire USB protocol handled by USB module
USB 2.0 Hi-Speed hub controller integrated to support up to 3 downstream USB ports
USB hub controller and FT4232H are USB bus powered – no external power supply needed
External power input pin available to supply external downstream USB ports
Support for USB suspend and resume
4 Asynchronous serial interfaces available which include 2 independent MPSSE engines
Defaults to 4 RS-232 interfaces
Asynchronous Serial data transfer rates from 300 baud to 12 Mbaud at TTL levels
Synchronous Serial (MPSSE) data rates of up to 30Mbps on JTAG, SPI and I²C
One dual-port USB A socket and 0.1 inch pitch header to support up to 3 downstream USB ports
Green/Amber status LED for downstream USB port 2&3
LED indicating power supply to external downstream USB ports
Onboard EEPROM 93LC56 for FT4232H configuration
UHCI / OHCI / EHCI host controller compatible
Gerelateerde Links
- FTDI Chip FT232RNL-TUBE 28-Channel 3.14 Mbps USB 2.0, 1.8 V
- FTDI Chip FT232BL-TRAY 5.25V USB 2.0 32-Pin LQFP
- FTDI Chip 5.5V 5.5 V, 20-Pin
- FTDI Chip FT231XS-U 5.5V 5.5 V, 20-Pin
- FTDI Chip 5.5V 5.5 V, 28-Pin TSSOP
- FTDI Chip FT260S-U 5.5V 5.5 V, 28-Pin TSSOP
- FTDI Chip 1.98V 1.8 V, 64-Pin LQFP
- FTDI Chip 5.5V 5.5 V, 20-Pin QFN