SMC Vacuum Ejector, 0.7 mm nozzle, -88 kPa 12 L/min, ZH series

RS-stocknr.:: 612-907
Fabrikantnummer:: ZH07DSA-06-06-06N
Fabrikant:: SMC

SMC Vacuum Ejector, 0.7 mm nozzle, -88 kPa 12 L/min, ZH series

Bekijk alle Vacuum Generators

Subtotaal (1 eenheid)*

€ 19,32

(excl. BTW)

€ 23,38

(incl. BTW)

Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw

Aantal stuks	Per stuk
1 +	€ 19,32

*prijsindicatie

RS-stocknr.:: 612-907
Fabrikantnummer:: ZH07DSA-06-06-06N
Fabrikant:: SMC

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SMC
	Product Type	Vacuum Ejector
	Maximum Suction Flow	12L/min
	Maximum Vacuum Pressure	-88kPa
	Nozzle Diameter	0.7mm
	Series	ZH
	Silencer	Yes
	Exhaust Port Type	Built In Silencer
	Maximum Supply Pressure	0.45MPa
	Vacuum Port Size	6 mm
	Supply Port Size	6 mm
	Vacuum Port Type	One-Touch
	Exhaust Port Thread Standard	One-Touch
	Minimum Operating Temperature	-5°C
	Vacuum Port Thread Standard	One-Touch
	Supply Port Type	One Touch Coupling
	Supply Port Thread Standard	One-Touch
	Maximum Operating Temperature	50°C
	Standards/Approvals	RoHS, ISO 8573-1:2010
	Exhaust Port Size	6 mm

	Alles selecteren
	Merk SMC
	Product Type Vacuum Ejector
	Maximum Suction Flow 12L/min
	Maximum Vacuum Pressure -88kPa
	Nozzle Diameter 0.7mm
	Series ZH
	Silencer Yes
	Exhaust Port Type Built In Silencer
	Maximum Supply Pressure 0.45MPa
	Vacuum Port Size 6 mm
	Supply Port Size 6 mm
	Vacuum Port Type One-Touch
	Exhaust Port Thread Standard One-Touch
	Minimum Operating Temperature -5°C
	Vacuum Port Thread Standard One-Touch
	Supply Port Type One Touch Coupling
	Supply Port Thread Standard One-Touch
	Maximum Operating Temperature 50°C
	Standards/Approvals RoHS, ISO 8573-1:2010
	Exhaust Port Size 6 mm

Land van herkomst:: JP

SMC Series ZH Vacuum Ejector, 12L/min Maximum Suction Flow, -88kPa Maximum Vacuum Pressure - ZH07DSA-06-06-06N

This vacuum ejector is a Compact pneumatic device designed to generate negative pressure for pick-and-place and holding tasks in industrial automation. It operates within a controlled temperature range and accepts pneumatic supply and vacuum connections via quick-connect fittings, making it suitable for systems that require Rapid installation and simple tubing interfaces.

Features & Benefits

• Maximum suction flow 12L/min enables steady handling of small loads
• Maximum supply pressure 0.45MPa allows use with standard pneumatic lines
• Maximum vacuum pressure -88kPa provides strong gripping force
• Nozzle diameter 0.7mm supports fine control of vacuum generation
• One-touch 6mm ports permit fast connection and maintenance
• Built-in silencer reduces exhaust noise during continuous cycling

Applications

• Suitable for automated PCB pick-and-place stations handling small components
• Ideal for Electronic Assembly fixtures requiring Rapid tool changes
• Used for vacuum grippers in Compact robotic end-effectors
• Can be used for leak testing small sealed units in production lines
• Suitable for temporary holding in mechanical assembly jigs

What temperature range is acceptable for reliable operation?

It functions correctly between -5°C and 50°C, so it should be installed where ambient conditions remain within this range.

How are connections MADE to plant pneumatic tubing?

Supply, vacuum and exhaust all use one-touch 6mm couplings for quick push-fit tubing attachment.

Can the unit be used where low exhaust noise is important?

Yes, the exhaust incorporates an integrated silencer to reduce noise at the outlet during operation.

How fine is the vacuum control for delicate components?

The 0.7mm nozzle produces a focused jet effect, enabling controlled vacuum generation suitable for small, fragile items.