Punches

Punch sets are ideal for punching neat holes in a variety of materials. Whether in textiles, woodworking or metalworking, a set of punch tools allows the operator to drive objects into the material, or form an impression on a workpiece. Sharp at one end, and hardened and flat at the other, a punch can be used with a hammer to achieve the desired results.


The RS range of punch sets includes several different types to suit your needs, from our own brand RS PRO and also well-known brands such as Bahco, Stanley, Gedore and Facom to name a few:


  • Centre Punch- A common type of punch with a semi blunted end. This is typically used to mark a centre for drilling in a piece. By creating a small recess for the drill bit to rest in, the drill is assured a greater chance of staying on course.
  • Drift Punch - Sometimes referred to as a pokey, this punching tool is often used for enlarging previously made holes. It can also be used for aligning holes prior to bolting.
  • Parallel Pin Punch - A parallel pin punch is often employed to remove pins from mechanical assemblies. When a pin is too tight to remove by hand, the correctly sized parallel pin punch can be employed to drive it loose.
  • Spring Pin Punch - Spring pin punches are used for removing roll pins, a type of mechanical fastener. For this reason, spring pin punches are also called roll pin punches and are specially shaped to remove roll pins without causing damage or becoming jammed.
  • Wad Punch - Have interchangeable heads and are used to cut accurate circles into textile materials. They can even be used on thin metal to make washers.
  • Anti-Vibration - With a shock-absorbing rubber handle, this punch not only offers the user maximum safety and comfort but also prevents clipping.

...
Lees meer Lees minder

Filters

1 - 20 van 122 producten worden weergegeven
Resultaten per pagina
Omschrijving Prijs Overall Length Shank Diameter Number of Pieces Point Angle Punch Type
RS-stocknr. 541-7223
FabrikantRS PRO
€ 35,89
Each
Aantal stuks
- 5 → 32 mm 10 - Wad
RS-stocknr. 381-4896
FabrikantRS PRO
€ 22,63
1 Set
Set(s)
- 1.6 → 4 mm 5 - Centre
RS-stocknr. 505-8688
FabrikantRS PRO
€ 23,45
Each
Aantal stuks
- 2 → 8 mm 6 - Parallel Pin
RS-stocknr. 381-4903
FabrikantRS PRO
€ 37,37
1 Set
Set(s)
- 1/16 → 7/32 in 8 - Parallel Pin
RS-stocknr. 626-1497
FabrikantRS PRO
€ 27,36
Each
Aantal stuks
- 2 → 8 mm 6 - Drift
RS-stocknr. 290-5109
FabrikantRS PRO
€ 18,04
Each
Aantal stuks
- 3.0 mm 1 20° Automatic
RS-stocknr. 460-9550
FabrikantRS PRO
€ 28,68
Each
Aantal stuks
- 17.0 mm 1 - Automatic
RS-stocknr. 456-3640
FabrikantRS PRO
€ 22,76
Each
Aantal stuks
- 3 → 10 mm 6 - Parallel Pin
RS-stocknr. 473-0698
FabrikantRS PRO
€ 2,02
Each
Aantal stuks
- 8.0 mm 1 - Centre
RS-stocknr. 381-4919
FabrikantRS PRO
€ 33,28
1 Set
Set(s)
- 3.2 → 9.5 mm 5 - Parallel Pin
RS-stocknr. 668-5755
FabrikantRS PRO
€ 5,12
Each
Aantal stuks
- 2.5 mm 1 - Centre
RS-stocknr. 467-6572
FabrikantRS PRO
€ 14,68
Each
Aantal stuks
- - 6 - -
RS-stocknr. 456-3634
FabrikantRS PRO
€ 25,22
1 Set
Set(s)
- 3 → 4 mm 6 - Pin
RS-stocknr. 701-0562
FabrikantRS PRO
€ 32,75
1 Set
Set(s)
- 10.0 mm 5 - Drift
RS-stocknr. 473-0705
FabrikantRS PRO
€ 1,98
Each
Aantal stuks
- 10.0 mm 1 - Centre
RS-stocknr. 875-4758
FabrikantRS PRO
€ 13,79
Each
Aantal stuks
- - 3 - Centre
RS-stocknr. 460-9544
FabrikantRS PRO
€ 26,28
Each
Aantal stuks
- 14.0 mm 1 - Automatic
RS-stocknr. 182-9791
FabrikantRS PRO
€ 5,15
Each
Aantal stuks
- 5.0 mm 1 - Parallel Pin
RS-stocknr. 423-2627
FabrikantRS PRO
€ 11,57
1 Set
Set(s)
- - 3 - Centre
RS-stocknr. 875-4764
FabrikantRS PRO
€ 31,19
Each
Aantal stuks
- 1/16 to 7/32 in 8 - Parallel Pin
Related Products
Centre punches available in four sizes each with ...
Description:
Centre punches available in four sizes each with a chemically blackened knurled grip and a round head A fine machine ground point with a 90° chamfer, gives accurate centering on cross lines and makes well defined impression for drillingThe round ...
Bahco Bachofit AWL for pre-punching and drilling holes. ...
Description:
Bahco Bachofit AWL for pre-punching and drilling holes. Two component handle with vertical groves for comfortable gripBlack finish tip for higher accuracyHandle marking for quick identification of the tip.
Gedore 316D pin punch set, excellent quality hot ...
Description:
Gedore 316D pin punch set, excellent quality hot forged, hardened and tempered. Six piece pin punch set supplied in metal case for easy storage. Six piece Pin Punch SetDIN 6450In metal case with lidHot forgedHardened and temperedStriking head, blue varnish ...
Tool fitted with a FACOM SLS attachment solution, ...
Description:
Tool fitted with a FACOM SLS attachment solution, preventing any risk of accidental fallsThe turning crimped cable solution, chosen and tested by FACOM, preserves the ergonomics of use of the toolLong stemHead hardness 43 HRcStem hardness 58 Hrc.