Ultimaker Nozzle for use with Ultimaker 2, Olsson Block 0.4 mm
- RS-stocknr.:
- 110-1983
- Fabrikantnummer:
- OBN002
- Fabrikant:
- Ultimaker
Momenteel niet beschikbaar
We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.
Alternatief
Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor een alternatief product.
Per stuk
€ 9,41
(excl. BTW)
€ 11,39
(incl. BTW)
- RS-stocknr.:
- 110-1983
- Fabrikantnummer:
- OBN002
- Fabrikant:
- Ultimaker
Specificaties
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Ultimaker | |
| Product Type | Nozzle | |
| Nozzle Material | Brass | |
| For Use With | Ultimaker 2, Olsson Block | |
| Nozzle Size | 0.4 mm | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk Ultimaker | ||
Product Type Nozzle | ||
Nozzle Material Brass | ||
For Use With Ultimaker 2, Olsson Block | ||
Nozzle Size 0.4 mm | ||
Standards/Approvals No | ||
Vrijgesteld
- Land van herkomst:
- NL
Ultimaker 3D Olsson Block Brass Jet Nozzle Printing Parts & Accessoriess
The Ultimaker allows for quick and easy nozzle changes, so different nozzle sizes can be selected to suit each project. Use a smaller nozzle to print fine lines for more detail, or use a larger nozzle to print thicker lines to decrease print duration. The Olsson block brass Jet nozzles have a special tip angle and shoulder width, they also have a special internal geometry with an angle less steep down to the nozzle hole. A special treatment applied inside also makes them slip more.
Note:
This nozzle is compatible with M6 Threads, you can put it on the Ultimaker Original (the fan shroud must be modified) or any of the Ultimaker family that has the Olsson Block mounted.
Features and Benefits
Clean them efficiently with cold pulls
Print faster, the plastic flows much easier than in classic nozzles
The 0.4mm is the standard size for a lot of 3D printers
The geometry of the inside makes it easier to get rid of plastic so changing colours or filament type is done faster and safer
Use the 0.25mm brass nozzle to print small detailed prints
Gerelateerde Links
- Ultimaker Nozzle Nozzle for use with Olsson Block, Ultimaker 2 0.25 mm
- Ultimaker Nozzle Nozzle for use with Olsson Block, Ultimaker 2 0.6 mm
- Ultimaker Nozzle Nozzle for use with Ultimaker 2, Olsson Block 0.5 mm
- Ultimaker Nozzle Olsson Block Kit for use with Ultimaker 2
- Ultimaker Nozzle for use with Olsson Block, Ultimaker 2+ 0.8mm
- Ultimaker Print Head for use with Ultimaker 2+ / Olsson Block 0.25 mm 0.6 mm, 0.8 mm
- Ultimaker Nozzle for use with Ultimaker S3, Ultimaker S5 0.4 mm
- Ultimaker Print Head for use with Ultimaker 2+ / Olsson Block 0.6 mm