Nexperia 74HC574PW,118 1 Flip Flop IC 74HC, 3 State, 20-Pin TSSOP
- RS-stocknr.:
- 170-4857
- Fabrikantnummer:
- 74HC574PW,118
- Fabrikant:
- Nexperia
Subtotaal (1 rol van 2500 eenheden)*
€ 460,00
(excl. BTW)
€ 557,50
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending 2.500 stuk(s) vanaf 30 december 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 2500 + | € 0,184 | € 460,00 |
*prijsindicatie
- RS-stocknr.:
- 170-4857
- Fabrikantnummer:
- 74HC574PW,118
- Fabrikant:
- Nexperia
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Nexperia | |
| Logic Family | 74HC | |
| Product Type | Flip Flop IC | |
| Input Type | CMOS | |
| Output Type | 3 State | |
| Clock Frequency | 24MHz | |
| Polarity | Non-Inverting | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 2V | |
| Package Type | TSSOP | |
| Pin Count | 20 | |
| Maximum Supply Voltage | 6V | |
| Maximum Propagation Delay Time @ CL | 38ns | |
| Minimum Operating Temperature | -40°C | |
| Trigger Type | Positive Edge | |
| Flip-Flop Type | D Flip-Flop | |
| Number of Elements per Chip | 1 | |
| Maximum Operating Temperature | 125°C | |
| Length | 6.6mm | |
| Height | 950μm | |
| Standards/Approvals | No | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Nexperia | ||
Logic Family 74HC | ||
Product Type Flip Flop IC | ||
Input Type CMOS | ||
Output Type 3 State | ||
Clock Frequency 24MHz | ||
Polarity Non-Inverting | ||
Mount Type Surface | ||
Minimum Supply Voltage 2V | ||
Package Type TSSOP | ||
Pin Count 20 | ||
Maximum Supply Voltage 6V | ||
Maximum Propagation Delay Time @ CL 38ns | ||
Minimum Operating Temperature -40°C | ||
Trigger Type Positive Edge | ||
Flip-Flop Type D Flip-Flop | ||
Number of Elements per Chip 1 | ||
Maximum Operating Temperature 125°C | ||
Length 6.6mm | ||
Height 950μm | ||
Standards/Approvals No | ||
Automotive Standard No | ||
- Land van herkomst:
- TH
The 74HC574: 74HCT574 is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the flip-flops.
Mixed 5 V and 3.3 V applications
Improved signal integrity with integrated termination resistors
High noise immunity
Flow through pin out for easy layout
Wide supply voltage range
Low propagation delay
Overvoltage tolerant input options
Integrated source termination resistor options
Bus hold options
Frequency division
Controlled delays
Interface between asynchronous and synchronous systems
Gerelateerde Links
- Nexperia 74HC574PW 3 State, 20-Pin TSSOP
- Nexperia 74LVC574APW 3 State, 20-Pin TSSOP
- Nexperia 74LVC74APW D Type, 14-Pin TSSOP
- Nexperia 74LVC273PW D Type, 20-Pin TSSOP
- Nexperia 74HC574D 3 State, 20-Pin SO
- Nexperia 74HC174D 16-Pin SOIC
- Nexperia 74HC74D D Type, 14-Pin SO
- onsemi MC74HC74ADTR2G 1 Flip Flop IC 74HC LSTTL TTL, 14-Pin TSSOP
