Telemecanique Sensors ZCMD Series Limit Switch Body, 1 NO/1 NC, IP67, IP66, Zamak Housing, 50V ac, 3A

RS-stocknr.:: 609-3840
Artikelnummer Distrelec:: 304-01-379
Fabrikantnummer:: ZCMD21C12
Fabrikant:: Telemecanique Sensors

Telemecanique Sensors ZCMD Series Limit Switch Body, 1 NO/1 NC, IP67, IP66, Zamak Housing, 50V ac, 3A

Subtotaal (1 eenheid)*

€ 88,18

(excl. BTW)

€ 106,70

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending 9 stuk(s) vanaf 24 augustus 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 88,18

*prijsindicatie

RS-stocknr.:: 609-3840
Artikelnummer Distrelec:: 304-01-379
Fabrikantnummer:: ZCMD21C12
Fabrikant:: Telemecanique Sensors

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Telemecanique Sensors
	Product Type	Limit Switch Body
	IP Rating	IP67, IP66
	Contact Configuration	1 NO/1 NC
	Housing Material	Zamak
	Contact Type	Snap Action
	Terminal Type	M12
	Switching Current	3A
	Series	ZCMD
	Minimum Operating Temperature	-25°C
	Switching AC Voltage	50V ac
	Switching DC Voltage	50V dc
	Maximum Operating Temperature	70°C
	Width	30mm
	Standards/Approvals	RoHS
	Length	59mm
	Depth	16mm
	Hazardous Area Certification	No
	Conduit Entry	M12

	Alles selecteren
	Merk Telemecanique Sensors
	Product Type Limit Switch Body
	IP Rating IP67, IP66
	Contact Configuration 1 NO/1 NC
	Housing Material Zamak
	Contact Type Snap Action
	Terminal Type M12
	Switching Current 3A
	Series ZCMD
	Minimum Operating Temperature -25°C
	Switching AC Voltage 50V ac
	Switching DC Voltage 50V dc
	Maximum Operating Temperature 70°C
	Width 30mm
	Standards/Approvals RoHS
	Length 59mm
	Depth 16mm
	Hazardous Area Certification No
	Conduit Entry M12

Telemecanique Sensors ZCMD Series Limit Switch Body, M12 Conduit Entry, 1NO/1NC Contact Configuration - ZCMD21C12

This limit switch body is designed to house and Interface mechanical switching elements for industrial control systems, providing a compact, sealed enclosure and an M12 conduit entry for electrical connection. It is intended for use where a small footprint and environmental protection are required, and is compatible with snap-action contact mechanisms for changeover switching in automation and machinery.

Features and Benefits:

• Zamak construction provides robust mechanical protection • IP67 and IP66 ingress protection enables waterproof operation • Snap-action contact type ensures Rapid make/break switching • 1NO/1NC contact arrangement allows versatile signalling options • Rated for 50V AC and 50V DC at 3A supports low-voltage circuits • Operates between -25°C and 70°C for varied ambient conditions

Applications

• Suitable for position sensing on factory conveyors and Gates • Ideal for safety interlocks in electrical panels and enclosures • Used with pneumatic and hydraulic actuators for end-of-travel detection • Can be used for machine-tool limit detection in workshops • Used for retrofitting as a replacement component in control cabinets

What type of electrical termination does it accept?

It uses an M12 Terminal connector to simplify wiring and enable quick connection to standard sensor and actuator cabling.

How does the contact configuration affect wiring options?

The single normally open and normally closed contacts permit both signalling and safety circuits without additional relays for Basic control schemes.

What mechanical form factor should I allow for panel layouts?

Allowance should be MADE for a Compact body measuring 59mm in length and 30mm in width when planning installation space.

Are there temperature limits for storage and operation?

The unit is specified to function reliably down to -25°C and up to 70°C in operational environments.