Gossen Metrawatt PROFITEST REMOTE Multifunction Tester 300V With RS232

RS-stocknr.:: 263-6766
Fabrikantnummer:: M514R
Fabrikant:: Gossen Metrawatt

Gossen Metrawatt PROFITEST REMOTE Multifunction Tester 300V With RS232

Subtotaal (1 eenheid)*

€ 1.484,70

(excl. BTW)

€ 1.796,49

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Voorradig bij de fabrikant

Klaar voor verzending vanaf 23 december 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 1.484,70

*prijsindicatie

RS-stocknr.:: 263-6766
Fabrikantnummer:: M514R
Fabrikant:: Gossen Metrawatt

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Gossen Metrawatt
	Loop Impedance Test Type	3 Wire, 2 Wire
	Product Type	Multifunction Tester
	Automatic RCD Test	No
	Model Number	PROFITEST REMOTE
	RCD Ramp Test	No
	Non-Tripping	No
	Insulation Test Voltage	300V
	Maximum Voltage Measurement	500V
	Earth Resistance Measurement	No
	Downloadable Data	No
	Interface Type	RS232
	Continuity Test Current	1.6mA
	RCD Test Type	Type A
	Standards/Approvals	part 1, EN 613261:2013, EN 60529 VDE 0470, IEC 610101/EN 610101/ VDE 04111, EN 6132621:2013
	Weight	1.1kg
	Length	120mm
	Remote Switch Mode	No
	Height	105mm
	Test Standards	part 1, VDE 0411-1, IEC 61010-1, EN 61010-1, EN 61326-1:2013, EN 61326-2-1:2013, EN 60529 VDE 0470
	IP Rating	IP40
	Safety Category Level	CAT III, CAT IV
	Safety Category Voltage	300V
	Power Source	5 V RS232
	Minimum Operating Temperature	5°C
	Maximum Operating Temperature	45°C
	Battery Type	Rechargeable
	Plug Type	Schuko

	Alles selecteren
	Merk Gossen Metrawatt
	Loop Impedance Test Type 3 Wire, 2 Wire
	Product Type Multifunction Tester
	Automatic RCD Test No
	Model Number PROFITEST REMOTE
	RCD Ramp Test No
	Non-Tripping No
	Insulation Test Voltage 300V
	Maximum Voltage Measurement 500V
	Earth Resistance Measurement No
	Downloadable Data No
	Interface Type RS232
	Continuity Test Current 1.6mA
	RCD Test Type Type A
	Standards/Approvals part 1, EN 613261:2013, EN 60529 VDE 0470, IEC 610101/EN 610101/ VDE 04111, EN 6132621:2013
	Weight 1.1kg
	Length 120mm
	Remote Switch Mode No
	Height 105mm
	Test Standards part 1, VDE 0411-1, IEC 61010-1, EN 61010-1, EN 61326-1:2013, EN 61326-2-1:2013, EN 60529 VDE 0470
	IP Rating IP40
	Safety Category Level CAT III, CAT IV
	Safety Category Voltage 300V
	Power Source 5 V RS232
	Minimum Operating Temperature 5°C
	Maximum Operating Temperature 45°C
	Battery Type Rechargeable
	Plug Type Schuko

Land van herkomst:: DE

Gossen-Metrawatt Multifunction Tester, 1.1kg Weight, 300V Insulation Test Voltage - M514R

This multifunction tester is a portable electrical tester designed for field measurements and diagnostic checks across installation and maintenance tasks. It operates within a controlled temperature range and connects via RS232 for data transfer. The instrument is powered by a rechargeable battery and is intended for use where equipment meeting recognised electrical and EMC standards is required.

Features and Benefits:

• *Made in Germany
• 300 V Insulation Test Voltage ensures safe low-voltage dielectric checks
• 500 V Maximum Voltage Measurement enables broader voltage diagnostics
• 1.6 mA Continuity Test Current provides realistic loop and conductor verification
• CAT III and CAT IV Safety Category permits testing in higher-risk installations
• IP40 Rating offers protection against common workshop particulates

Applications

• Suitable for verifying RCD Type A functionality in installations
• Ideal for loop impedance 2‑wire and 3‑wire tester procedures
• Used for insulation tester 300 V and 500 V measurement during commissioning
• Can be used with Schuko connections for portable continuity testing
• Used in environments requiring electrical safety tester compliance with EN 61010-1

What temperature range is appropriate for operation?

The instrument functions between 5 °C and 45 °C.

Which Interface is provided for connection to external systems?

It uses an RS232 Interface and operates from a 5 V RS232 power source.

What test types for RCD and loop impedance does it support?

It supports Type A RCD tests and both 2‑wire and 3‑wire loop impedance tests.

How portable is the unit for site work?

The unit weighs 1.1 kg and is powered by a rechargeable battery for transportable use.

What standards and approvals does the instrument meet?

It conforms to multiple standards including EN 61010-1 and EN 61326-1 among others.