Druck DPI 620 25 mbar to 2 bar Pressure Calibrator Calibration Kit

RS-stocknr.:: 199-3843
Fabrikantnummer:: DPI620SPC-2barg
Fabrikant:: Druck

Druck DPI 620 25 mbar to 2 bar Pressure Calibrator Calibration Kit

Subtotaal (1 eenheid)*

€ 13.869,43

(excl. BTW)

€ 16.782,01

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending vanaf 30 december 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 13.869,43

*prijsindicatie

RS-stocknr.:: 199-3843
Fabrikantnummer:: DPI620SPC-2barg
Fabrikant:: Druck

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Druck
	Battery Type	Lithium-Polymer
	Product Type	Pressure Calibrator Calibration Kit
	Maximum Pressure Measurement	2bar
	Minimum Pressure Measurement	25mbar
	Accuracy	±0.005 %
	Pressure Port Type	Gauge
	Data Logging	Yes
	Model Number	DPI 620
	Intrinsically Safe	Yes
	Display Type	LCD
	Current Loop Measurement	Yes
	Power Source	Rechargeable lithium Battery
	Weight	1.1kg
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	50°C
	Width	114mm
	Length	183mm
	Height	55mm
	Standards/Approvals	ATEX, BS EN 610101:2010, BS EN 613261:2006, CE, IECEx
	Hazardous Area Certification	ATEX, ETL, IECEx
	Plug Type	USB

	Alles selecteren
	Merk Druck
	Battery Type Lithium-Polymer
	Product Type Pressure Calibrator Calibration Kit
	Maximum Pressure Measurement 2bar
	Minimum Pressure Measurement 25mbar
	Accuracy ±0.005 %
	Pressure Port Type Gauge
	Data Logging Yes
	Model Number DPI 620
	Intrinsically Safe Yes
	Display Type LCD
	Current Loop Measurement Yes
	Power Source Rechargeable lithium Battery
	Weight 1.1kg
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 50°C
	Width 114mm
	Length 183mm
	Height 55mm
	Standards/Approvals ATEX, BS EN 610101:2010, BS EN 613261:2006, CE, IECEx
	Hazardous Area Certification ATEX, ETL, IECEx
	Plug Type USB

Land van herkomst:: GB

Druck Pressure Calibrator Calibration Kit, 2 bar Maximum Pressure Measurement, ±0.005% Accuracy - DPI620SPC-2barg

This pressure calibrator calibration kit is a handheld instrument designed for field verification and calibration of gauge pressure systems within low-pressure ranges. It operates from -10°C to 50°C and is powered by a rechargeable lithium battery, enabling portable use across routine maintenance and hazardous-area tasks. The unit includes a clear LCD for readouts and supports data logging and current loop measurement for integration with test procedures.

Features and Benefits:

• Intrinsically safe ATEX certification enables work in classified zones
• High accuracy ±0.005% provides precise calibration results
• Measurement range 25 mbar to 2 bar covers low-pressure applications
• Rechargeable lithium‑polymer battery allows extended field operation
• USB Interface supports data extraction and report generation

Applications

• Suitable for calibrating gauge transmitters in process plants
• Ideal for maintenance in ATEX and IECEx certified areas
• Used for verification of pneumatic control loops and instruments
• Can be used for on-site logging of pressure and loop signals

What approvals make it suitable for hazardous environments?

It holds ATEX and IECEx hazardous-area certification and ETL recognition, allowing use where intrinsic safety is required.

How does the unit transfer recorded measurements?

Logged data can be exported via the USB connector to facilitate analysis and archive storage.

What display and measurement functions are available on the device?

The instrument provides an LCD readout and supports gauge pressure readings Plus current loop measurement.

What are the operating temperature limits for field use?

The device is specified to function between -10°C and 50°C.

Note

Why choose Druck?
What began in 1972 as a small business in Leicester, UK, Druck has grown into a global pressure-measurement business recognised as a world leader, delivering high quality piezo-resistive pressure sensors and test and calibration instruments to a wide range of applications for customers across the globe.
Druck is one of the only organisations to control the whole manufacturing process from silicon to final product. All products are high-quality, developed from the in-house (UK), raw processing of silicon to delivering the final product.
With Druck, you can be sure of quality, accuracy and reliability. We are Druck. We deliver peace of mind.