Druck DPI 620 25 mbar to 20 bar Pressure Calibrator Calibration Kit

RS-stocknr.:: 199-3845
Fabrikantnummer:: DPI620SPC-20barg
Fabrikant:: Druck

Druck DPI 620 25 mbar to 20 bar Pressure Calibrator Calibration Kit

Subtotaal (1 eenheid)*

€ 13.869,43

(excl. BTW)

€ 16.782,01

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending vanaf 29 december 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 13.869,43

*prijsindicatie

RS-stocknr.:: 199-3845
Fabrikantnummer:: DPI620SPC-20barg
Fabrikant:: Druck

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Druck
	Battery Type	Lithium-Polymer
	Maximum Pressure Measurement	20bar
	Product Type	Pressure Calibrator Calibration Kit
	Minimum Pressure Measurement	25mbar
	Accuracy	±0.005 %
	Pressure Port Type	Gauge
	Model Number	DPI 620
	Data Logging	Yes
	Intrinsically Safe	Yes
	Current Loop Measurement	Yes
	Display Type	LCD
	Power Source	Rechargeable lithium Battery
	Minimum Operating Temperature	-10°C
	Weight	1.1kg
	Maximum Operating Temperature	50°C
	Width	114mm
	Standards/Approvals	ATEX, BS EN 610101:2010, BS EN 613261:2006, CE, IECEx
	Length	183mm
	Height	55mm
	Hazardous Area Certification	ATEX, ETL, IECEx
	Plug Type	USB

	Alles selecteren
	Merk Druck
	Battery Type Lithium-Polymer
	Maximum Pressure Measurement 20bar
	Product Type Pressure Calibrator Calibration Kit
	Minimum Pressure Measurement 25mbar
	Accuracy ±0.005 %
	Pressure Port Type Gauge
	Model Number DPI 620
	Data Logging Yes
	Intrinsically Safe Yes
	Current Loop Measurement Yes
	Display Type LCD
	Power Source Rechargeable lithium Battery
	Minimum Operating Temperature -10°C
	Weight 1.1kg
	Maximum Operating Temperature 50°C
	Width 114mm
	Standards/Approvals ATEX, BS EN 610101:2010, BS EN 613261:2006, CE, IECEx
	Length 183mm
	Height 55mm
	Hazardous Area Certification ATEX, ETL, IECEx
	Plug Type USB

Land van herkomst:: GB

Druck Pressure Calibrator Calibration Kit, 20 bar Maximum Pressure Measurement, ±0.005% Accuracy - DPI620SPC-20barg

This pressure calibrator calibration kit provides portable pressure measurement and calibration capabilities for field and hazardous-area environments. It is intended for use where accurate gauge pressure readings and loop signal verification are required, offering data logging and a handheld LCD for on-site diagnostics. The kit operates across a wide temperature range and is powered by a rechargeable lithium battery, enabling extended use in difficult conditions.

Features and Benefits:

• ±0.005% accuracy ensures precise calibration results
• 25mbar to 20bar measurement range supports diverse systems
• Intrinsically safe certification permits use in hazardous areas
• Data logging with USB connectivity simplifies Record keeping
• Current loop measurement supports 4 to 20 mA verification

Applications

• Suitable for on-site instrument calibration in process plants
• Ideal for calibration tasks in ATEX and IECEx zones
• Used with gauge pressure transmitters and switches
• Can be used for commissioning pneumatic control systems
• Appropriate for maintenance of 4 to 20 mA loop instruments

What temperature range can it operate within?

It functions between -10°C and 50°C to accommodate cold starts and warm environments.

How is the unit powered and how portable is it?

It uses a rechargeable lithium‑polymer battery and weighs 1.1 kg for handheld portability.

Which approvals permit use in hazardous locations?

It holds ATEX, IECEx and ETL approvals and meets relevant BS EN and CE standards.

What physical interfaces are available for data transfer?

It provides a USB plug for exporting logged data and interfacing with external devices.

What measurement modes beyond pressure does it support?

It also measures current loops to verify 4 to 20 mA signals during calibration.

Note

Why choose Druck?
What began in 1972 as a small business in Leicester, UK, Druck has grown into a global pressure-measurement business recognised as a world leader, delivering high quality piezo-resistive pressure sensors and test and calibration instruments to a wide range of applications for customers across the globe.
Druck is one of the only organisations to control the whole manufacturing process from silicon to final product. All products are high-quality, developed from the in-house (UK), raw processing of silicon to delivering the final product.
With Druck, you can be sure of quality, accuracy and reliability. We are Druck. We deliver peace of mind.