STAHLWILLE Torque Tester, 3/8 in Drive, ±1 % Accuracy, 100 Nm Increment
- RS-stocknr.:
- 268-4358
- Fabrikantnummer:
- 96521022
- Fabrikant:
- STAHLWILLE
Subtotaal (1 eenheid)*
€ 2.398,34
(excl. BTW)
€ 2.901,99
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Voorradig bij de fabrikant
- Klaar voor verzending vanaf 24 juni 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 2.398,34 |
*prijsindicatie
- RS-stocknr.:
- 268-4358
- Fabrikantnummer:
- 96521022
- Fabrikant:
- STAHLWILLE
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | STAHLWILLE | |
| Digital | No | |
| Product Type | Torque Tester | |
| Drive Size | 3/8 in | |
| Scale Graduations | 100Nm | |
| Accuracy | ±1 % | |
| Maximum Torque - Nm | 100Nm | |
| Minimum Torque - Nm | 2Nm | |
| Standards/Approvals | Can be used as part of a calibration system | |
| Alles selecteren | ||
|---|---|---|
Merk STAHLWILLE | ||
Digital No | ||
Product Type Torque Tester | ||
Drive Size 3/8 in | ||
Scale Graduations 100Nm | ||
Accuracy ±1 % | ||
Maximum Torque - Nm 100Nm | ||
Minimum Torque - Nm 2Nm | ||
Standards/Approvals Can be used as part of a calibration system | ||
Vrijgesteld
- Land van herkomst:
- DE
Stahlwille Transducer, 100Nm Maximum Torque, 2Nm Minimum Torque - 96521022
This transducer converts applied torque into a measurable mechanical signal for use in calibration and measurement contexts within industrial settings. It is intended for torque assessment on tools and machinery where a non-electronic indication is acceptable, and it integrates into calibration workflows to verify torque delivery across a specified working range.
Features and Benefits:
• ±1% accuracy supports precise comparative measurements
• 3/8 inches drive permits use with common torque tools
• Measures from 2Nm to 100Nm for broad task coverage
• Non-digital mechanical output simplifies integration into rigs
• Suitable for inclusion in calibration systems for verification
• 3/8 inches drive permits use with common torque tools
• Measures from 2Nm to 100Nm for broad task coverage
• Non-digital mechanical output simplifies integration into rigs
• Suitable for inclusion in calibration systems for verification
Applications
• Suitable for bench calibration of hand torque wrenches
• Ideal for verification tasks in manufacturing test rigs
• Used for routine torque checks in maintenance departments
• Can be used for torque auditing in assembly lines
• Ideal for verification tasks in manufacturing test rigs
• Used for routine torque checks in maintenance departments
• Can be used for torque auditing in assembly lines
What torque range can it assess reliably?
It operates across a minimum of 2Nm up to a maximum of 100Nm, enabling checks from low-torque assemblies to heavier fastening tasks.
How does the drive Interface with existing tools?
The 3/8 inches drive accepts standard sockets and adaptors, allowing direct connection to common torque tools and test fixtures.
Is the device compatible with calibration procedures?
Yes, it is designed to be employed as part of a calibration system to corroborate torque outputs during comparative testing.
Does the transducer produce electronic data?
No, it provides a mechanical, non-digital measurement output suitable for setups that do not require electronic signalling.
Gerelateerde Links
- STAHLWILLE Torque Tester ± 1 % Accuracy, 200 Nm Increment
- STAHLWILLE Torque Tester ± 1 % Accuracy, 10 Nm Increment
- STAHLWILLE Torque Tester ±1 % Accuracy, 10 Nm Increment
- STAHLWILLE Torque Tester ± 1 % Accuracy, 400 Nm Increment
- STAHLWILLE Torque Tester ±1 % Accuracy, 100 Nm Increment
- STAHLWILLE Digital Torque Tester 1 % Accuracy
- STAHLWILLE Torque Tester 0.25% from measured value Accuracy, 20 Nm Increment
- STAHLWILLE Torque Tester 10 Nm Increment