STAHLWILLE Torque Tester, 1/2 in Drive, ± 1 % Accuracy, 200 Nm Increment
- RS-stocknr.:
- 268-4359
- Fabrikantnummer:
- 96521023
- Fabrikant:
- STAHLWILLE
Subtotaal (1 eenheid)*
€ 2.334,33
(excl. BTW)
€ 2.824,54
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Voorradig bij de fabrikant
- Klaar voor verzending vanaf 22 juni 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 2.334,33 |
*prijsindicatie
- RS-stocknr.:
- 268-4359
- Fabrikantnummer:
- 96521023
- Fabrikant:
- STAHLWILLE
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | STAHLWILLE | |
| Product Type | Torque Tester | |
| Digital | No | |
| Drive Size | 1/2 in | |
| Scale Graduations | 200Nm | |
| Accuracy | ± 1 % | |
| Maximum Torque - Nm | 200Nm | |
| Minimum Torque - Nm | 4Nm | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk STAHLWILLE | ||
Product Type Torque Tester | ||
Digital No | ||
Drive Size 1/2 in | ||
Scale Graduations 200Nm | ||
Accuracy ± 1 % | ||
Maximum Torque - Nm 200Nm | ||
Minimum Torque - Nm 4Nm | ||
Standards/Approvals No | ||
Vrijgesteld
- Land van herkomst:
- DE
Stahlwille Transducer, 200Nm Maximum Torque, 4Nm Minimum Torque - 96521023
This transducer converts applied torque into a measurable signal for industrial test and control environments. Designed for mechanical torque measurement, it interfaces with standard half-inch drive tools to monitor rotational force across a practical working range suitable for production and laboratory settings.
Features and Benefits:
• 1/2in drive compatibility enables direct coupling with common tools
• Measurement span from 4–200 Nm covers light to mid-range tasks
• ±1% accuracy supports tight control in calibration processes
• Analogue output format integrates with legacy instrumentation
• Scale graduations up to 200 Nm assist Visual verification
• Measurement span from 4–200 Nm covers light to mid-range tasks
• ±1% accuracy supports tight control in calibration processes
• Analogue output format integrates with legacy instrumentation
• Scale graduations up to 200 Nm assist Visual verification
Applications
• Suitable for torque validation in assembly automation lines
• Ideal for calibration benches requiring mechanical input coupling
• Used with test rigs for verifying fastener torque profiles
• Can be used for quality control sampling in manufacturing
• Ideal for calibration benches requiring mechanical input coupling
• Used with test rigs for verifying fastener torque profiles
• Can be used for quality control sampling in manufacturing
What minimum torque can be detected accurately by this device?
It reliably senses torque down to 4 Nm, allowing detection of low-torque events in assembly operations.
How is precision expressed for routine measurements?
Precision is specified as ±1% of measured value, providing consistent results for process control.
Which drive format is required to connect tools?
A 1/2in drive Interface is required for direct mechanical connection to compatible sockets and drivers.
Does the output suit digital data acquisition systems?
The unit provides an analogue signal, so it requires an appropriate analogue-to-digital converter for integration with digital acquisition equipment.
Gerelateerde Links
- STAHLWILLE Torque Tester ± 1 % Accuracy, 10 Nm Increment
- STAHLWILLE Torque Tester 0.25% from measured value Accuracy, 20 Nm Increment
- STAHLWILLE Torque Tester 10 Nm Increment
- STAHLWILLE Torque Tester 20 Nm Increment
- STAHLWILLE Torque Tester ± 1 % Accuracy, 100 Nm Increment
- STAHLWILLE Torque Tester ± 1 % Accuracy, 400 Nm Increment
- STAHLWILLE Torque Tester ± 1 % Accuracy, 100 Nm Increment
- STAHLWILLE Digital Torque Tester 1 % Accuracy